Can you hit the port?

Ping,Tracert,Knock on the port with Telnet.

I’m guessing firewall rules related to your vpn.

https://releases.electronjs.org/release?channel=stable

This is a trade off. Many of these apps work on osx and Linux because they are browser-based. If they go back to native apps you lose that portability.

There’s nothing wrong with hardware raid. You can probably pass them through as individual drives.

I would use them as is but only buy sata going forward.

Sounds like this affected a very small number of users. Anyone see this themselves?

Name and shame.

Stop calling it green and start calling it cheap/free if you want to make some progress.

You responded to a question with an incorrect answer. I was correcting that.

VPNs shouldn’t need to forward any ports when using ipv6. They can provide an entire ipv6 subnet to you.

Port forwarding is a function of NAT. It’s only needed because there aren’t enough ipv4 addresses for every device, so in most networks a lot of devices share a single ip and specific ports are forwarded to specific internal hosts

IPv6 has a large enough address space that this isn’t needed. You can still do it if you want. But mostly you just need a firewall without any NAT.

There’s more to it than this but you should get the idea.

I use a Reolink camera for this purpose. Its not self hosted but it’s solar capable and doesn’t need an inbound firewall rule.

Is the traffic not already encrypted? What would wire guard be providing here?

What’s the question

Windows 11 brings change but no significant features. The general population hates change.

It’s selective. You just provide the internal address or the Tailscale host name. All other traffic runs outside of the vpn tunnel.

Honestly it takes 10 mins to set up you should try it out.

Well yes but that’s a one-time setup.

Back in the days of dial up and bbs this was a problem but you would still get robots trying to connect to modems by dialing every phone number possible.

Used gpu and memory.

Tailscale meets your needs even without an exit node configured.

Recipe blogs were already a problem.