• 0 Posts
  • 71 Comments
Joined 2 years ago
cake
Cake day: June 30th, 2023

help-circle





  • Yeah absolutely, and any bugs that are found are permanently gonna be there, stuff like that. It sucks. Thus the “I probably wouldn’t bother either”. But if you’re really passionate about it I say go for it, just cover your tracks really well, only work with people you trust implicitly, and don’t popularize the project until you’re ready to be done with it. The moment it gets hyped and picked up by ign/kotaku/etc you’re done.

    I think you can still get the word out to get other modders though. These things don’t seem to get squashed at the planning stage, otherwise publishers would be spending tons of resources going after people who have maybe done no actual work. It seems like what happened with this mod, when they make socials and release ongoing updates, screenshots, videos, etc, of their work, that’s what gets people hyped and all the attention (and eventual hammer) on them

    Of course this means you get no credit for your work, which sucks. If you’re undertaking such a massive effort and getting 0 credit I could understand why you wouldn’t bother (although it’s kind of badass to do it for no clout)






  • You can replace just the touch bar, I’ve done it, but it’s a nightmare. Much cheaper and less waste though

    That thing is seriously glued on. Like people complain about the battery adhesive but it’s not really that bad, some solvent takes it out pretty quick on most models (though it’s still not necessary and would be much better if it was just screwed into place). That touch bar though, that glue is crazy and any solvent or heat you use has to be super carefully managed because you’ll melt the keys very easily. Some tutorials have you basically just smash the shit out of it and scrape away the resulting shards but that seemed like a bad idea.

    For the record I did heat from the rear and light application of acetone. Took a bit but I was able to pry it up although I did break the first couple. Doesn’t matter really but it can make it harder to prep the space for the new one.

    Also fun times: on some models if the touch bar glitches out it shorts the motherboard and causes random reboots




  • quixotic120@lemmy.worldtomemes@lemmy.worldJust Say No
    link
    fedilink
    English
    arrow-up
    1
    ·
    11 months ago

    I agree with you in that it wouldn’t stifled the same way but I still think it would be an inherently flawed measure in determining the true number of cases, which is probably impossible. Going back to my original post even if you allowed anonymous reporting I’m betting a lot of partners would still not speak out due to intimidation and you would probably get some false positives (though admittedly this is probably significantly less of a concern)

    Doesn’t mean it’s not worth doing as it would probably get you something closer to an accurate number but the accurate number is likely impossible to measure


  • quixotic120@lemmy.worldtomemes@lemmy.worldJust Say No
    link
    fedilink
    English
    arrow-up
    2
    ·
    11 months ago

    In response to this I would say that the studies here overrely on self report, which is inherently flawed when asking someone to report on a character flaw

    I go back the philosophical question: if you beat your partner would you reveal this to an academic who is going to put it on the record?

    Some may, but a lot won’t. Inherently flawed.


  • quixotic120@lemmy.worldtomemes@lemmy.worldJust Say No
    link
    fedilink
    English
    arrow-up
    16
    ·
    11 months ago

    Statistics are hard to determine on domestic violence

    The “40% of cops beat their wives” probably comes from this:

    https://files.eric.ed.gov/fulltext/ED338997.pdf

    A congressional hearing where a professor testified that officers were asked if they had “gotten out of control and behaved violently towards their spouses or children within the last 6 months” and approximately 40% said yes. This is vaguely worded and while acting violently towards your family is shitty regardless there are a number of ways to interpret that question (beat them regularly, slapped them, yell at them, berate them, isolated incidents vs consistent campaigns, etc)

    There is a concept in experimental design called an operational definition, that a behavior should be defined in such a way that observers trying to measure the variable are clear in what they are trying to measure. “Self injury” is poor on its own, but saying “hand to head hits with closed fist” is quite a bit better (though still can be problematic because sometimes intensity can be a problem but I digress)

    https://policing.umhistorylabs.lsa.umich.edu/files/original/5528df2d5b5c33cfeaa930146cfe20ccb5cad0cd.pdf

    Neidig study also found a rate of around 41% and is cited to support the claim but if you read the methodology it’s flawed to do this: the operational definition is much improved but the data for 41% includes violence initiated both by cops and by their spouses. If you only include violence initiated by cops it’s closer to 28%. However this does indicate they create toxic relationships based around violence and mutual violence is not uncommon in domestic abuse. There’s a lot more to dynamics in domestic violence (including power dynamics when the police don’t take dv very seriously and power dynamics when your partner is a member of the police who are supposed to respond the arrest them for doing dv)

    So that leads to other experimental design issues here. For one, these are self report and this is likely a huge flaw. Think about it, if you were a person beating your spouse, would you be down to admit that to an academic who is absolutely going to document it?

    So there have been other studies to address this that look at crime rates via police reports rather than self reports. These show relatively low rates of about 17%. However, this suffers from the power dynamic flaw above. I worked in domestic abuse support for years and several women I worked with were spouses of police (and firefighters too fwiw). Per these people their spouses were never charged and often gloated about this; the cops were called often and would do anything to resolve the situation except arrest them. They would drive the spouses somewhere else, the would take the cop out drinking (great idea), etc. I do wonder if a report only gets filed when the damage from dv becomes impossible to ignore; when the cop beats their partner or child so badly they requires intense medical attention or the scene becomes so intense it is a public spectacle

    The initial research is from the 90s and not much has been done since, likely because working around these design issues is extremely difficult. I genuinely do not know how one would do it in a way that would not introduce a ton of bias and error. The only thing I could even think is that you could interview spouses but that is almost as flawed as the officer self report. I would imagine there is a culture of intimidation there preventing open dialogues plus there is always the chance for false positives I suppose.



  • The audio improvements are more impressive than the video improvements but they’re niche

    8k is a boring upgrade. We’ve officially reached the point where pixel density is like “well that looks better but only a little”. 1080p was dramatic, 4k was solid, 8k is eh

    The audio improvements are really for people who have external sound processing and want ultra low latency. This is cool but again only impacts really niche use scenarios. They use the example of AVR and headphones. I will use the example of gaming with an avr and games that rely on on low latency sound like bemani/rhythm games.

    I have an avr and playing rhythm games on it requires calibration every time, and often changing settings about muting player sounds so I don’t disorient myself with sounds that are triggered late by my own playing. The game I’m currently into shows an audio delay of just over .1ms with the calibration tool, mostly imperceptible for media watching and playing easy songs but a nightmare on hard difficulties.

    Certainly not worth upgrading my tv, avr, and cabling though



  • Moving to a rack is nice, I love my rack. If you’re in or near a city I suggest keeping an eye on Craigslist and ebay (search by distance nearest and lowball ones that have been sitting for months) because it’s not uncommon for nice racks to go real cheap as long as you come get them. I got my rack realllll cheap ($40, 42u, fully enclosed with massive pdu) because it’s a 90s ibm rack and it’s welded steel so it’s like 450lbs. Moving it was a nightmare but it’s real sturdy and I’m never moving it again now that it’s in my basement

    For my goals in the short term I have to replace a sas cable that caused a crc error on one drive, it only happened once per smart data but still want to get that done asap. I also have another drive that’s beginning to show some smart issues; it’s on the same sas cable so it may be related because the errors didn’t increase (they all were related to an unclean shutdown, confusing things) but it’s old anyway so better safe than sorry I guess.

    Medium term I want to finally upgrade my ups. The one I have now is not a rack mount which is part of what led to the unclean shutdown. It’s also a bit undersized. I have a generator for my house so I don’t need something massive but the one I have is 450va and several years old so with the tired battery I only can get about 5m of runtime. It’s more than enough to cover the transfer from power cutting out to generator power but I want something that’s a bit more reliable in case of generator failure. This is pricey though because my array is pretty huge so it’ll probably be held off unless I find a good deal on a dead one that has cheap batteries available

    I also want to put the rack on its own circuit. This is something I should do asap because it’s cheap, just gotta find time and rearrange my panel a bit because it’s pretty full. This would be the other part of the unclean shutdown as the outlet would be in a much better location and I could also install a locking outlet

    Would also be nice to pick up a super cheap monitor locally, like something for $15-20 from a pawn shop or Craigslist or something for the rack. Earlier this year I had nginx crash on my server and the webui became inaccessible, I had to drag my nice and kind of large desktop monitor down to the basement to solve the issue, would be nice to just have a shitty small monitor on the rack for that

    Speaking of nginx I keep meaning to setup some kind of reverse proxy or mdns for all my dockers so that I can just do whatever.whatever instead ipaddress:3993 which makes my password managers barf but I’ll probably just be lazy and edit my hosts file

    Longer term I want to add a secondary low power server that can run something like pfsense to handle my routing, then turn my current wireless routers into access points because they kind of suck as routers.

    And of course the array could always be bigger, especially if drive prices fall

    I will probably realistically only do the drive and cable replacement, the circuit thing since that’ll be like $40 and a half hour of work, the monitor if I can find one, and maybe the hosts file thing. If I run into cash (unlikely) or a crazy deal (you never know) the ups would be my next priority but there’s a million other things going in life (deductibles just reset for health insurance, hooray)